GT1000P英国RDP测量传感器_产品展示_深圳奥德赛创精密仪器有限公司

点击放大	产品名称：	英国RDP测量传感器
	产品型号：	GT1000P
	产品产地：	中国大陆
	访问次数：	197
	非常高的准确性精密线性轴承微型高循环寿命不锈钢无限的分辨率

详细内容

These transducers are for displacement / position measurement. They make an accurate position measurement of the movement of the armature (the sliding part) relative to the body of the displacement transducer.

This transducer uses the Linear Variable Differential Transformer (LVDT) principle which means that it is probably the most robust ａnd reliable position sensor type available. The strength of the LVDT sensor＇s principle is that there is no electrical contact across the transducer position sensing element which for the user of the sensor means clean data, infinite resolution ａnd a very long life.

The GT series gauging transducer employs precision linear bearings to optimise the LVDTs measurement precision ａnd repeatability.

LVDT transducers require external signal conditioning as detailed in the ＇Electronics＇ section of this website.

Spring return version.
	Our spring displacement transducer has bearings to guide the armature inside the measurement sensor ａnd a spring which pushes the armature to the fully out position. Spring return LVDTs are appropriate where it is not possible to connect the transducer armature to the moving component being measured.

End (axial) exit cable.Connection details

D1= 8.0mm

Type

Range

Linearity error (% F.S.)

X (nom)

B- (No clamp zone)

Total weight

Spring force (nom)

Over-Travel

Sensitivity (nom)

Spring force at X

Spring rate

Inward over-travel

Outward over-travel

GT0500Z

±0.5mm

<±0.25

26mm

7mm

6mm

1.0N

1.7N/cm

0.3mm

110mV/V

GT1000

±1mm

<±0.25/±0.1

53mm

14mm

11g

0.8N

2.6N/cm

1.4mm

0.3mm

150mV/V

GT2500

±2.5mm

<±0.25/±0.1

58mm

20mm

18mm

13g

1.1N

2.6N/cm

0.8mm

0.3mm

375mV/V

GT5000

±5mm

<±0.25/±0.1

87mm

22mm

30mm

16g

1.5N

1.5N/cm

1.3mm

0.3mm

700mV/V

Side (radial) exit cable.Connection details

D1= 8.0mm

A= 6mm

Type

Range

Linearity error (% F.S.)

X (nom)

B- (No clamp zone)

Total weight

Spring force (nom)

Over-Travel

Sensitivity (nom)

Spring force at X

Spring rate

Inward over-travel

Outward over-travel

GT0500XRA

±0.5mm

<±0.25

33mm

7mm

6mm

1.0N

1.7N/cm

0.3mm

110mV/V

GT1000RA

±1mm

<±0.25/±0.1

57mm

14mm

12g

0.8N

2.6N/cm

1.4mm

0.3mm

150mV/V

GT2500RA

±2.5mm

<±0.25/±0.1

61mm

20mm

18mm

16g

1.1N

2.6N/cm

0.8mm

0.3mm

375mV/V

GT5000RA

±5mm

<±0.25/±0.1

91mm

22mm

30mm

21g

1.5N

1.5N/cm

1.3mm

0.3mm

700mV/V

Air push version.
The air-push version of the GT displacement transducer is extended by the application of air to the displacement transducer ａnd is retracted by an internal spring. This is useful where the LVDTs position measurement tip must be retracted to allow components to move on a conveyor for example.

End (axial) exit cable.Connection details

AL	=	8mm
AD	=	3mm
D1	=	8.0mm
Air filter	=	<0.0005mm
Relative humidity	=	<60%

Type

Range

Linearity error (% F.S.)

X (nom)

B- (No clamp zone)

Total weight

Air pressure

Over-Travel

Sensitivity (nom)

Minimum

Maximum

Inward over-travel

Outward over-travel

GT1000P

±1mm

<±0.25/±0.1

72mm

26mm

14mm

11g

400mbar

650mbar

1.4mm

0.3mm

150mV/V

GT2500P

±2.5mm

<±0.25/±0.1

77mm

20mm

18mm

13g

450mbar

650mbar

0.8mm

0.3mm

375mV/V

GT5000P

±5mm

<±0.25/±0.1

112mm

22mm

30mm

16g

450mbar

550mbar

1.3mm

0.3mm

700mV/V

Specification
Excitation/supply (acceptable)	0.5V to 7V rms, 2kHz to 10kHz (sinusoidal)	Temperature coefficient (span)	±0.01% F.S. /癈 (typical)
Excitation/supply (calibrated)	5V rms, 5kHz (sinusoidal)	Operating temperature range	-40癈 to 100癈
Output load	100k Ohms	Electrical termination	2m (integral cable) Longer available to order.

原创作者：深圳奥德赛创精密仪器有限公司

标签：测量传感器

咨询价格

留言框
感兴趣的产品：	*
您的单位：	*
您的姓名：	*
联系电话：	*
详细地址：
常用邮箱：
您的任何要求、意见或建议： *
验证码：	*

产品目录

联系我们

产品介绍

英国RDP测量传感器

Specification

同类相关产品

相关文章