德国PTL F45.61耐磨性试验机/测试芯棒德国PTL F45.61耐磨性试验机/测试芯棒 | | | | | | | | | | | | | | | | | | | | | PTL Abrasion Resistance Testing Machine | | | | | to determine the durability of cable coverings, flexible insulating tubing, coats of lacquer, inscriptions, designations ａnd the like at room temperature by scraping to ａnd fro according to the REPEATED SCRAPE TEST procedure | | | according to | DIN 29 867 | :1979-11 § 4.3.3, § 4.3.4, § 5.1.9 ａnd § 5.1.10 Fig. 2. | | | Standard Outfit: | | | 1 | drive unit, with eccentric drive, speed 60 rpm, stroke 10 mm, |  | | | 1 | scraping head rod with rotation bearing ａnd with arresting device, | | | 1 | scraping head with holding device for the test mandrels, with rod to guide the weight pieces, each 10 test mandrels ? 0.45 mm ａnd ? 0.6 mm, | | | 1 | sliding plate for the linear movement ａnd height adjustable specimen support with clamping jaws for specimens with diameters up to 12 mm, | | | 1 | set of weights, for load of the test mandrel, with weight pieces for loads with a total mass from 150 g up to 1 750 g in steps of 10 g, | | | 1 | electronic predetermining pulse counter, 5-digit, to indicate the number of cycles ａnd to disconnect the machine when reaching the preselected number of cycles, | | | 1 | control device, electric circuit for disconnection with maximally 50 V DC, disconnect-ing current approx. 0.05 A, "ON/OFF"-switch, "START"- ａnd "STOP"-button, ａnd switch "FAULT" to indicate that the insulation of the specimen support has been scraped off. | | | Design: | | | | 19"-rack with steel sheet housing, papyrus-white structure varnished, width approx. 510 mm, height approx. 250 mm, depth approx. 370 mm, parts made of stainless steel, anodized aluminium or black-oxide-finished steel, with mains connecting cord set, for connection to 230 V 50 Hz, | | | Abrasion Resistance Testing Machine | Article No.: | F 45.61 | | | | | | Spare parts: | | | Test mandrels: steel grade X 12 CrNi 17 7 according to DIN 17 224, made of round spring wire according to DIN 2076, dimensional accuracy C, smooth, polished, without surface refinement, | | | Test mandrels, | 50 pieces, | diameter 0.45 mm | Article No.: | F 45.83 | | | Test mandrels, | 50 pieces, | diameter 0.6 mm | Article No.: | F 45.87
| | | | | | | | | | | | | | | | | | | | | |
深圳市奥德赛创精密仪器有限公司的诚信、实力和产品质量获得业界的认可。 欢迎各界朋友莅临参观、指导和业务洽谈。请联系销售总监：苏曼 原创作者：深圳奥德赛创精密仪器有限公司
标签：德国PTL F45.61耐磨性试验机/测试芯棒
|
