1.2.4.2 Fast Photodetector Model FPS-1
Features
ֺ Fast 1ns response time
ֺ Measure temporal pulse shape of short or long pulses
ֺ Wide spectral range 193 – 1100nm
ֺ Optional attenuators and fiber adapters available
ֺ Battery or wall cube operation
Description
The FPS-1 fast photodetector is a compact easy to use
very fast photodetector with wide spectral response.
It is used to measure the temporal pulse shape of laser pulses.
It has two modes of operation: Into 50Ohm load for ns high peak power pulses and 10kOhm load for longer lower peak power pulses.
In order to adjust the input intensity to the level appropriate for the detector, you may scatter the laser light off of a white matt surface and
back off till the appropriate intensity is reached. Alternatively, or in addition, you may procure the ND attenuators listed below which may
be stacked.
7.5
12
11.5
17
24.5
BNC Connector
Battery housing
1/4" - 20 BSWx6 deep Mounting Thread
1.035"-40 (SM1)
23
9.2
27
9.5
Detector Surface
Battery On/Off
Mounting Thread Alternate Pole
1/4" - 20 REF
49
61
Detector Silicon PIN photodiode
Spectral Range 193nm – 1100nm
Detector Area 0.8mm²
Wavelength of Peak Sensitivity 720nm
Spectral Response See graph below
Performance Specs Into 50Ω load Into 10kΩ load
Sensitivity at Peak Wavelength 0.15V for 1W/cm² input 60V for 1W/cm² input
Risetime 10-90% 1.5ns 3µs
Maximum Output Voltage 10V
Power Supply 12V A23 alkaline battery (40 hours lifetime). Also can be operated from 12VDC wall cube power supply. The power
supply can be ordered from your local distributor.
Input Direct beam or from fiber connection.
Dimensions See drawing
Thread Front flange is threaded with male SM1 thread.
Sensor Part Number FPS-1 fast photodiode 7Z02505
Optional Accessories and P/N ND1 nom. x10 attenuator 7Z08200
ND2 nom. x50 attenuator 7Z08201
Fiber adapters SMA 1G01236
FC 7Z08229
SC 7Z08227
ST 7Z08226
SM1 to M20 adapter (1 necessary for above adapters and/or attenuators) 1G02259