FN7080美国MEAS传感器

        香港奥德赛创科技有限公司产品主要有安规检测类产品、环境类试验箱、万能试验机、疲劳试验机、燃烧阻燃类试验设备各类检测仪器，并代理了美国ED&D、日本KYOKUTOU极东、日本极东、日本志贺、日本爱模、日本TEAC、日本LINIAX、日本日本NMB、日本NoiseKen、美国MONROE、美国ELECTRO-LITE、以色列ophir、德国WAZAU、德国PTL、德国PTI、OPHIR等知名品牌检测仪器。
    深圳市奥德赛创精密仪器有限公司的诚信、实力和产品质量获得业界的认可。欢迎各界朋友莅临参观、指导和业务洽谈。请联系销售总监：苏曼

产品描述: FN7080安装在档杆把手的位置，用于测量换档时所需要的两轴或三轴力。安装环和连接器使得FN7080适用于大部分车辆的变速杆，安装简单。传感器的外形和尺寸与一般档杆把手相同，所以在测试时可以代替档杆把手。安装的灵活性使得传感器可以用于测试台和车载测试。客户还可以选择放大输出的型号，因此FN7080深受欧洲各个汽车制造厂商的欢迎。作为拥有多年经验的传感器设计和制造商，MEAS常常与客户合作，按要求定制适合特殊用途和测试环境的传感器。同时，我们也根据客户需要提供成套系统。配套元件（传感器，电源，放大器和数显系统）配置统一，经过校正，可供客户立即使用。

特点:

• 2轴或3轴力测量
• 适合大部分变速杆
• 结构紧凑
• 可选放大输出
• 多种设计可选
  • The FN7080 is installed in place of the original gear knob on the gear stick of a vehicle ａnd will measure
  • the force required to change gear. Force is measured either in two or three directions. An adapter coupled with
  • an interface collar allows a simple ａnd rapid fitting of the FN7080 to the majority of vehicles.
  • The sensor’s geometry ａnd size mean that it is as ergonomic as the original gear knob. The ease of
  • mounting enables the FN7080 to be used on a vehicle or on a test bench. An optional version provides direct
  • high level output ａnd makes the FN7080 a favorite among European car builders.
  • Measurement Specialties, Inc. have many years of experience as a designer ａnd manufacturer of
  • sensing solutions to the automotive industry ａnd can supply standard or custom sensors for specific uses and
  • testing environments.
  • Consult Measurement Specialties, Inc. Engineering Department for a custom solution to your
  • application.
  • FEATURES APPLICATIONS
  • 2 ａnd 3 axes measurements · On-board vehicle equipment
  • Fits most gear sticks · Test bench equipment
  • Compact ａnd ergonomic design · Robotics ａnd effectors
  • Optional high level output · Laboratory ａnd Research
  • Exists in many optional designs
  • STANDARD RANGES
  • Ranges in
    • Parameters
    • Operating Temperature Range (OTR) -20 to 80° C [-4 to 176° F]
    • Compensated Temperature Range (CTR) 0 to 60º C [32 to 140° F]
    • Zero Shift in CTR <0.5% F.S. / 50º C [/ 100° F]
    • Sensitivity Shift in CTR <1% of reading / 50º C [/ 100° F]
    • Ranges (F.S.) 200 to 500 N [40 to 100 lbf]
    • Over-Range
    • Without Damage 1.2 x F.S.
    • Accuracy
    • Combined non-linearity & hysteresis £±0.3% F.S.
    • Cross effect £3% F.S.
      • Model FN7080 FN7080-A1 FN7080-A2
      • Supply Voltage 5Vdc 10 to 30Vdc ±15Vdc (±12 to ±18Vdc)
      • F.S. Output4 ±2mV/V ±2V ±5% F.S. ±5V ±5% F.S.
      • Zero Offset4 ±5% F.S. 2.5V ±5% F.S. 0V ±5% F.S.
      • Input Impedance/Consumption 350 to 700 <50mA 50mA
      • Output Impedance 350 to 700 1 k5 1 k5
      • Insulation under 50Vdc ≥100M ≥100M ≥100M

原创作者：深圳奥德赛创精密仪器有限公司